Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.
To resurrect Samsung SPH-D710:
- Solder JTAG cable to Samsung SPH-D710 JTAG pads;
- Connect USB cable to phone and PC;
- Insert battery;
- Make sure Samsung SPH-D710 is selected in the list of models;
- Make sure a fixed TCK frequency is selected;
- Click Resurrect button;
- Wait till software signals a successful operation completion;
- Disconnect USB cable, de-solder JTAG wires;
Now phone is in bootable
condition, that is, even if it does not start up normally, you can
flash it using original Samsung downloader software to restore it to the
working state.
To enter download mode:
To enter download mode:
- Disconnect PC cable;
- Insert battery;
- Hold both ‘Volume Down’ and ‘Home’ keys and press Power-On.
0 komentar:
Posting Komentar